Peaq PDR200 Bedienungsanleitung Seite 43

COMPLETING THE WLAN CONNECTION
1. The connection begins. The device
should now establish a connection with
the WLAN. Once the connection has
been established, the notification <Set-
up-Assistant is finished> appears.
Confirm the display with SELECT.
2. If the WLAN cannot be accessed (e.g.
locked for new WLAN devices) the failure
notification "Connection not successful"
appears.
3. In this case, check the setting of your
WLAN-router.
Note
The entered password (WEP/WPA key) will
be saved and will not need to be entered
again.
After a successful set-up and connection,
the following display appears:
PDR200_A5_131219_1.indb 43
MODE
Press MODE to select between:
– Internet radio
– Music Player
– FM radio
– AUX in
To choose the desired mode you also can
call up the main menu:
1. Press MENU in any mode setting
2. Select Main menu
ENGLISH
43
19/12/13 10:39 AM