Transmitter Controls - Klipsch KG-300 Bedienungsanleitung

TRANSMITTER CONTROLS

6
4
9
7
3
5
2
1
8
10 11
1 Logo / Pairing Button
1
Press and Hold initiates Pairing Mode
2 2 Power LED – Blue / Red LED
Solid Blue = Unit is ON and linked to headset
Flashing Blue = Unit is in Pairing Mode
Red = Unit is ON but not paired to headset
OFF = Unit is OFF
3 3 Dolby ® Digital LED
Red = Dolby Signal is present and being Decoded
OFF = Dolby Signal is not present
9
4 4 Klipsch Spherespace Surround LED
Blue = Surround Processing is ON
OFF = Surround Processing is OFF
5 Mode Button with LED
5
Press cycles through the different operational modes.
The modes are Analog Chat, USB Audio and USB Chat.
Green LED = Analog Chat (Xbox 360, Xbox One, PS4)
Amber LED = USB Audio (PC with USB Audio Only)
Blue LED = USB Chat (PS3, PC with analog or optical)
6 Auxiliary Headphone Volume Up - For headphone jack output on front
6
of transmitter, does not effect headphone volume of KG-300. Press increases
volume of headphone amplifier.
7 Auxiliary Headphone Volume Down - For headphone jack output on front
7
of transmitter, does not effect headphone volume of KG-300. Press decreases
volume of headphone amplifier.
8 Auxiliary Headphone Out - Connect a passive headphone to listen to game audio
8
9 Digital Optical Audio Input Jack
9
1 Analog Audio Input Jack
10
11 USB Input Jack
11
10 11