Klipsch KG-300 Bedienungsanleitung Seite 16

PAIR THE HEADPHONE AND THE TRANSMITTER
The KG-300 headset and KG-300 transmitter come pre-paired. If they become unpaired follow these steps:
1.
2. Press and hold the Power Button on the KG-300 headset until the LED begins flashing blue.
3. When pairing is complete the LEDs on both will turn solid blue.
Power Button
Press and hold the Power Button on the KG-300 transmitter until the LED begins flashing blue.
(IF NECESSARY)
Power LED
Solid Blue = PAIRED
Flashing Blue = PAIRING MODE