Parrot DRIVER HEADSET Bedienungsanleitung Seite 8

Parrot DRIVER HEADSET/Parrot MOBILE HEADSET
Pairing a phone
• The headset must be switched off.
• Hold down the «Power» button for four seconds.
• The LED flashes alternately blue and red.
• The headset is visible to all Bluetooth devices for three minutes.
• From your Bluetooth phone, search for Bluetooth peripherals
(consult your phone's user guide or refer to the «Support» heading
on the www.parrot.biz website).
• Select «Parrot Headset».
• Enter «0000» on your phone when prompted.
• Once connected to your Bluetooth phone, the LED flashes slowly
blue.
Your headset is now set up and ready to be used.
Note: if you are unable to find the headset with your phone, the headset
might be invisible to Bluetooth devices. If so, switch the headset off and
then hold down the «Power» button for four seconds. The LED flashes
alternately blue and red. The Parrot DRIVER HEADSET/Parrot MOBILE
HEADSET is now detectable.

English