User Interface - Rs Pro Rsdg800 Series Schnellstart

User Interface

The waveform generator can only display one channel's parameters and waveform.
The picture below shows the interface when choosing sine waveform. The interface
will have some differences when an alternative function is selected.
2
3
4
5
1. Current Function
Display current function name. For example: "sine" shows that sine waveform
function is being chosen.
2. Waveform Display Area
It shows each channel's current waveform.
3. Frequency
It shows each channel's current waveform's frequency. After pressing the
corresponding Freq menu, use number keys or knob to change the parameter
value.
4. Amplitude
It shows each channel's current waveform's amplitude. After pressing the
corresponding Ampl menu, use number keys or knob to change the parameter
value.
1
6 7
8
11