Chauvet Hurricane 901 Schnellanleitung Seite 3

EN Hurricane™ 901 QRG
Manual Fog Button
Remote Connector
Product Overview
Power In
Fuse Holder
Back Panel View
Power Switch
AC Power
This product has a fixed voltage power supply and it can work with an
input voltage of either 120 V, 60 Hz or 230 V, 50 Hz, depending on the
specific model.
Fuse Replacement 1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the Safety Notes.
Safety Cable
Mounting
Clamp
Mounting
Bracket
Safety Eyehook
Product
Mounting
Diagram
Nozzle
Bracket Adjustment Knob
3