Initial Settings; Battery Installation; User Interface - BeeWi BWZ200 Handbuch

6

2. InItIAl SEttInGS

2.1. Battery installation

make sure the battery has been completely charge before the first use or any further use
after long storing.
- Remove the battery from the battery slot
- Connect the battery to the end of the USB charging cable
- Connect the USB charging cable to any USB charger (PC or ACDC Adapter)
During the charging process, the USB charger light will turn on. The light will turn off when
the battery is fully charged.
2.2 BuggyPad Installation
Go to the app store and look for "BeeWi BuggyPad" app. Follow the Smartphone on-
screen indications to download and install the app. Once the application has been
successfully installed, you can launch it directly. Insure the Buggy has been connected
prior to start the application.
3. USInG tHE BUGGY
3.1. Connection
It is necessary to connect the Buggy over WiFi prior to launch the app. Turn on the buggy,
go to the WiFi menu of your smartphone and look for the WiFi device "BeeWi BWZ200
XXXX" where "XXXX" are the last 4 character of the mAC address. Once it has been
selected, it will connect automatically without password.

3.2. User Interface

Launch the BuggyPad application. After showing briefly the launch screen, the app will
show you the main screen below with the camera picture on the background:
1. Battery meter (1 to 5 bars)
2. Settings scroll bar (iOS only)
3. Photo/Video Button
4. Left/Right direction
5. Forward/Backward direction
Note: on the Android app, the
settings are accessible using
the option button
Smartphone
on your
2 1
3
4
5
ENGLISH