Product Specification; Dimensions Weight; Initial Settings; Battery Charge - BeeWi BBZ352 Bedienungsanleitung

Smart Target
1. Power On/Off button
2. Lives indicator LEDs
3. 3 x AAA batteries slot

1.4. Product Specification

Helicopter Specifications
BLUETOOTH CHIP
BLUETOOTH RANGE
PROTOCOL
BATTERY
TYPICAL USE TIME
CHARGE TIME
SERVO CONTROLS
IR SENSORS
DIMENSIONS
WEIGHT
Target Specifications
IR SENSORS
TX RANGE
TX RADIUS
BATTERY
DIMENSIONS
WEIGHT

2. INITIAL SETTINGS

2.1. Battery Charge

- Make sure the Helicopter is switched OFF
- Plug the USB cable into the USB port on your PC: the
light at the USB charger end is lightening.
- Connect the USB cable end to the charging socket
located underneath the helicopter. Do not force, the
cable end should connect smoothly.
- During the charging process, the USB charger light
will turn off; if the light turns on again, it means the
helicopter is fully charged.
4
All manuals and user guides at all-guides.com
2
1
Bluetooth 3.0
Class 2, up to 10 m
Wireless iAp, SPP
Lithium Polymer 180 mAH
Up to 8 minutes continuous
Up to 40 minutes
3 channels + gyroscope
1 TX (3 m range), 1 RX
L 200 mm x H100 mm x W140 mm
45 g
1 TX, 1 RX
Minimum 3 m
+/- 30°
3 X AAA cells (not included)
D 76 mm x H 30 mm
40 g
5
3
ENGLISH