Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ON/OFF
To switch the meter ON, rotate the Function selector switch
from the OFF setting to any measurement setting. To switch the
meter OFF, rotate the Function selector switch
setting. By default, the meter will automatically switch itself OFF
after 30 minutes of inactivity. If the meter automatically switches
itself OFF while in a measurement setting, rotate the Function
selector switch
to switch the meter ON. To deactivate the OFF switch functionality,
press and hold the 'SEL' button
OFF setting. When auto power OFF is deactivated, the Auto power
off icon
will not be visible in the display.
'SEL' (SELECT) BUTTON (FOR SECONDARY FUNCTIONS)
The 'SEL' button
application accessible by the Function selector switch
current, voltage and low impedance, it toggles between AC and DC.
For the other functions, it switches between °F and °C, between Hz
and % duty cycle, and between Continuity, Resistance and Diode
test. The default function for each application is printed on the meter
in white. The secondary function (or functions) for each setting is
printed on the meter in orange.
DATA HOLD
Press the Data hold/Backlight/Work light button
measurement on the display. Press again to release the display
to return to live measuring.
BACKLIGHT & WORK LIGHT
Press and hold the Data hold/Backlight/Work light button
more than one second to turn the backlight and work light ON
simultaneously. The backlight and work light will both automatically
switch OFF after 3 minutes of inactivity.
RANGE
The meter defaults to auto-ranging mode
automatically determines the most appropriate measurement range
for the testing that is being conducted. To manually force the meter
to measure in a different range, use the Range button
1. Press the 'RANGE' button
manually (
'RANGE' button repeatedly
available, stopping once the desired range has been reached.
2. To return to auto-ranging mode, press and hold the 'RANGE'
button
for more than one second (
7
FUNCTION BUTTONS
to any other setting (excluding the OFF setting)
2
activates the secondary function for each
9
7
will be deactivated on the LCD). Press the
before switching ON from the
9
to select the measurement range
to cycle through the ranges
7
to the OFF
2
. For
2
to hold the
6
6
. This mode
.
7
will be reactivated).
2
for
16
7
Werbung
Inhaltsverzeichnis
