Fuse Replacement - Chauvet DJ Freedom Par Quad-4 Schnellanleitung

Freedom™ Par Quad-4 QRG EN
AC Power
Freedom™ Par Quad-4 has an auto-ranging power supply that works with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Power Linking
For the maximum number of Freedom™ Par Quad-4 products that you can power
link at each voltage, see the User Manual or the sticker on the product.

Fuse Replacement

1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace
with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Battery Power
The Freedom™ Par Quad-4 comes with a rechargeable lithium battery for cable-
free operation.
Charging the
The battery charges whenever the product is plugged into a power source. If the
Battery
product is plugged in and not in operation, make sure the On/Off switch is in the
Off position.
For optimal battery life, charge the Freedom™ Par Quad-4 battery for 24
hours prior to initial use.
4