Inserting The Batteries - Wezag CS 300 Betriebsanleitung

6.2

Inserting the Batteries

INFORMATION
+
The electrical Crimping Machine CS 300 is not operable without inserted batteries or if the
batteries are empty.
+
Disconnect power supply.
+
Turn the battery compartments 1 under
the electric Crimping Machine CS 300 to
open them.
+
Insert the batteries (2 x 2 x 1,5V Baby
Cells Type C) one after another with the
negative pole pointing to the top.
+
Close battery compartments 1 by turning
them.
If the wrong batteries are inserted or if they
are inserted in the wrong way, the following
error prompt appears:
If the batteries are empty, the following error
prompt appears:
BDA CS 300 – 06/15 – REV. B
048111000x03
048111000x04
1
Page 62 / 84
Fig. 6.4
Fig. 6.5