Avermedia DarkCrystal C874 Kurze Installationsanleitung Seite 7

Quick Installation Guide
Component Video & Stereo
Audio Cable
HDMI Cable Output to TV
USB Cable connects to PC
Power Adaptor & Plug
IR Blaster Cable
Component Cable
RCA Audio Cable
Choose either
box.
Use output connection to your TV or LCD monitor only when you want to playback
the programs recorded on your PC/ Notebok with your AVerMedia DarkCrystal HD
Capture Station.
It is necessary to use
Otherwise, use these connections optionally or when you want to simultaneously watch
the programs is being recorded.
In connection, please attach the end of the IR Blaster Cable, at close distances
less than 20 cm, over the infrared sensor on your set-top box.
3 Installing Drivers and the Software Utility
1. Make sure all connections are firm, secure
and correct.
2. Then boot your PC.
3. Place the Installation CD into the CD-ROM
drive.
4. Choose Install Driver to install AVerMedia
DarkCrystal HD Capture Station driver.
5. Install ArcSoft TotalMedia Extreme.
Install ArcSoft TotalMedia Extreme" below)
6. Install AVerMedia Scheduler if needed.
"B. Install AVerMedia Scheduler" below)
Note
+ (HD) or (SD) input connection at one time to your set-top
output connections to your TV when you are in IR Learning.
(see "A.
English-4
Composite Cable
TV
TV / LCD Monitor
PC / Notebook
Wall Outlet
Set-top Box (Front)
Set-top Box (Back) / Camcorder /
VCR/VCD/DVD player
(see