Avermedia DarkCrystal C874 Kurze Installationsanleitung Seite 14

Quick Installation Guide
12. Now the IR Learning is done. Select the
"Create a recording schedule now!" option
if you want to use "Schedule Record" right
away. Click Finish to close this wizard.
NOTE : If you want AVerMedia DarkCrystal HD
Capture Station to recognize infrared command
sequence from more of your set-top box remote
controls, please right click on the AVerMedia
Scheduler launcher located in the lower right corner of
the screen, and choose Device Manager. Then click
the Add button to go through the IR learning
process again. Here will list all devices you have set
up. Please choose one for scheduled recordings.
7 Using ArcSoft TotalMedia Extreme
A. Recording Video (TotalMedia Extreme 2)
1. Open TotalMedia Extreme 2
main menu.
2. Choose Record Video to
open capture module.
3. Set AVerMedia DarkCrystal
HD Capture Station as your
source.
4. Choose the Video and Audio
input you are using for
recording. Click on Format
settings to adjust the bitrate.
Higher bitrate brings better
video quality of the recording
but more disk space is used.
5. The recordings are saved as
H.264 .TS files
6. Choose a destination folder.
7. Click on the Capture button to
start the recording.
English-11