Care And Maintenance; Troubleshooting - TaoTronics TT-BA07 Handbuch

same time.
• The adapter will automatically re-pair when powered on.
In RX mode:
In RX mode, the adapter is able to pair with two Bluetooth
devices at the same time.
1. Follow previous instructions in the "Pairing" section to pair the
TT-BA07 with your rst device. Disable the Bluetooth function
on your rst device. Tap the Power Button twice to pair with
the second device.
2. Turn on the Bluetooth of the rst device, now TT-BA07 adapter
is successfully paired with both devices.
Note:
• Only one device can play music at any time. You have to
stop the music on one device to play on the other.
• The adapter will automatically re-pair when powered on.

Care and Maintenance

• Keep the adapter away from heat and humidity.
• Do not expose the adapter to direct sunlight or extreme heat.
• Do not try to take the adapter apart. It may cause serious
damage.
• Do not drop or knock the adapter on hard surfaces as it
damages the interior circuit.
• Do not use chemicals or detergents to clean the product.
• Do not scrape the surface with sharp objects.

Troubleshooting

My adapter will not power on.
Please recharge it and make sure the adapter has enough
battery power. Plug the unit to a charger and see if the LED
indicator becomes red.
I am having trouble pairing and connecting to my Bluetooth
pairing device.
Please check the following:
• Your Bluetooth device supports the A2DP profile.
• The adapter and your device are next to each other or within
3 feet / 1 meter.
• The adapter is in pairing mode; this is indicated by the LED
ashing in red and blue alternately.
11/12