Electromagnetic Fields (Emf); Inserting Batteries - Philips HR2391 Bedienungsanleitung

EnglisH
6
important
Read these instructions for use carefully before you use the appliance and save them for future
reference.
Make sure that there is nothing on the weighing plate when the scales are not in use.
,
Do not immerse the scales in water or any other liquid and do not allow liquid to enter the
,
scales.
Always place the appliance on a stable, level and horizontal surface when you use it.
,
Make sure your hands and the appliance are dry when you insert the batteries.
,
A microwave oven or a mobile phone may cause interference, which can lead to unreliable
,
weighing results.
Use the kitchen scales at a safe distance of at least 1.5 metres from a working microwave
,
oven, or switch off the microwave oven. (Fig. 1)
Keep a mobile phone that is switched on at a safe distance of at least  metres from the
,
scales, or switch off the mobile phone. (Fig. )

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and in accordance with the instructions in this instruction manual, the appliance is safe to
use according to scientific evidence available today.
Preparing for use
The appliance runs on four AAA 1.5-volt batteries (not included). We advise you to use Philips
PowerLife batteries on account of their long life and environmental friendliness.
Do not use rechargeable batteries in this appliance.

Inserting batteries

Make sure your hands and the appliance are dry when you insert the batteries.
1 Remove the battery compartment cover. (Fig. )
 Place the batteries in the battery compartment and reattach the battery compartment
cover. (Fig. 4)
Make sure the + and - poles of the batteries point in the right direction.
,
Using the appliance
The scales indicate weight in graduations of 1 gram from 2 gram onwards.
The appliance can weigh up to kg. If you put a weight of more than kg on the weighing
,
plate, 'Err' appears on the display.
Weighing directly on the weighing plate
1 Press the on/off button ( I) briefly to switch on the scales. (Fig. 5)
The appliance is ready for use after  seconds.
,
 Put the ingredients to be weighed directly on the weighing plate. (Fig. 6)
The weight is displayed immediately (Fig. 7).
,
 Press the on/off button ( I) again to switch off the appliance.
Weighing in a bowl
1 Press the on/off button ( I) briefly to switch on the scales.
The appliance is ready for use after  seconds.
,
 Put an empty bowl on the weighing plate. (Fig. 8)