Cleaning And Maintenance; Service Centre - DAY Useful Everyday 751081 Gebrauchsanweisung

All segments are displayed for 3 seconds,
after which the receiver starts to connect to
the transmitter. The signal symbol will � ash
during this time. It takes around 3 minutes to
complete the connection.
Setting the time
Press and hold the SET button for 3 seconds
to set the time.
12/24-hour display � ashes on the display.
Switch between 12- and 24-hour display by
pressing the MEM button.
Press the SET button to con� rm.
The hour � gure � ashes. Set the hour by
pressing the MEM button.
Press the SET button to con� rm.
The minutes � ash. Set the minutes by
pressing the MEM button.
Press the SET button to con� rm.
The time is now set. If you do not press a
button for 30 seconds while setting the time,
the setting procedure will automatically end.
Display of maximum and minimum
temperature
You can display the maximum and minimum
recorded temperature by pressing the MEM
button brie� y.
First press: Displays the maximum recorded
indoor and outdoor temperature (MAX).
Second press: Displays the minimum
recorded indoor and outdoor temperature
(MIN).
Third press: Displays the current indoor and
outdoor temperature.
Press and hold the MEM button for 3 seconds
to clear the memory.

Cleaning and maintenance

The thermometer can be wiped down using
a well-wrung cloth. It must not be exposed to
water, liquids or damp.
If the numbers in the display become weak
or are not visible, replace the batteries.
Remove the batteries if the thermometer will
not be used for a prolonged period.

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• www.schou.com
GB
15