Saddle Installation - Vecnum NIVO Betriebsanleitung

6 - Saddle installation

Loosen rear bolt
6.1
5mm
Remove bolt and nut from upper
6.2
rocker of the rail clamp
Put the saddle rail into the lower
6.3
rocker of the rail clamp
Put the upper rocker back onto the
6.4
saddle rail
Hang up the rear clamp bolt into
6.5
the upper rocker
22
Adjust saddle position
6.6
5mm
Adjust saddle tilting first, then horizontal position
-8.5°
Tighten rear bolt to lower the saddle bottom
Tighten front bolt to lower the saddle nose
5mm
32mm
8.5°
0°
73° default angle
23