Vertical Pan; System Settings; Osd Timeout; Osd Horizontal Position - Guntermann & Drunck Rackconsole 17Hr Installation Und Betriebsanleitung

Main menu

Vertical Pan

System Settings

OSD Timeout

OSD Horizontal Position

OSD Vertical Position

16 · RackConsole 17HR
In this section the
play detail) is set. The value entered here
depends on the selected zoom level. The default
vertical pan is 0. When
tion of the picture cannot be changed here.
The OSD Timeout is set in this section. The default
value for the timeout is 30 seconds. The value
can be set between 0 and 60 seconds in 5 second
steps. 0 seconds stands for an infinitive value.
The OSD won't be switched off when 0 is
selected here.
In this section the
set. The value can be set between 0 (left margin)
and 100 (right margin). The default value is 0
(center of the Display).
In this section the
set. The value can be set between 0 (left margin)
and 100 (right margin). The default value is 0
(center of the Display).
Vertical Pan (position of the dis-
Zoom is set to 0, the posi-
of the OSD is
Horizontal Position
Vertical Position of the OSD is