Control Panel & Description Of Function - Eberg QUBO Q40HD Bedienungsanleitung

CONTROL PANEL & DESCRIPTION OF FUNCTION
1. POWER BUTTON
Press to turn the unit «ON» or «OFF».
2. FUNCTION
Press this button to select cooling, heating, or dehumidifying.
3. TEMPERATURE ADJUSTMENT BUTTON (up)
In cooling mode: This button raises the preset temperature by 1°C each time it is
pressed, the maximum limit is 30°C. In heating mode: this button raises the preset
temperature by 1°C each time it is pressed, the maximum limit is 25°C
4. TEMPERATURE ADJUSTMENT BUTTON (down)
In cooling mode: this button lowers the preset temperature by 1°C. each time it is
pressed, the minimum limit is 17°C. In heating mode: this button lowers the preset
temperature by 1°C each time it is pressed, the minimum limit is 15°C.
5. LED DISPLAY
The display indicates the current temperature setting or timer setting. When the
set temperature or the timer are adjusted, the new setting is shown then the
display reverts to the current set temperature.
– The display is also used to display error codes.
6. SPEED
Press to select either LOW, MEDIUM, HIGH or AUTO fan speed. If AUTO is selected
(in cooling mode), HIGH, MEDIUM or LOW will be automatically selected according
to the difference between the temperature setting and the ambient temperature.
31