10. OUT BUTTON
When you press this button, you set the end point of the seamless loop and you start the loop. To
finish the loop, press again this button.
11. CONT. / SINGLE BUTTON
Press this button to switch between the SINGLE and CONTINUOUS play mode. The selected
mode is indicated on the LCD. In SINGLE mode, after each track, the unit stops the reading. In
CONTINUOUS mode, the unit reads all tracks and stops.
12. PROG AND FOLDER CONERSION BUTTON
In STOP mode, you can program several tracks (20 tracks max):
- Press the STOP button to enter in the stop mode
- Press the PROG button to enter in the program mode
- Use the skip track buttons to choose the track you want to listen then press the PROG button to
enter your choice.
- Use one more time the skip track buttons to choose the track you want to listen then press the
PROG button to enter your choice.
- Repeat the operation to select all the track you want to listen
- Press the play / pause button to start the playback
13. +10 BUTTON
Use this button to jump of 10 tracks in one press.
14. SKIP I<< BUTTON
Use this switch to restart the track or to select the last track.
15. SKIP >>I BUTTON
Use this button to select the next track.
16. PITCH BEND – BUTTON
The pitch will drop while the - button is pressed and return to the original pitch when it is released.
17. PITCH BEND + BUTTON
The pitch will automatically rise when the + button is pressed and return to the original pitch when
it is released.
18. USB PORT
Support USB playing and you may also connect the computer with the USB cable but only when
enter into USB work mode.
19. DISC-TRAY
To enter the disc, please refer to the explanations under 6.2 CD-tray.
20. DISPLAY
21. REMOTE SENSOR
This sensor receives the information of the remote control. Don't place any object or sticker in front
of the sensor.
22. PLAYER/TUNER
Press this button to select the desired PLAYER or TUNER mode.
23. STANDBY
24. MUTE
Press this button to shut off the audio ,press it again to activate audio.
6