Linking The Headset To The Phone - Jabra BT100 Handbuch

A fully charged battery provides up to 3 hours of talktime, and over 2 weeks of
standby/off time. 3 hours of talk time, 7.5 hours of standby time (Bluetooth data link – no
audio), 36 hours of standby time (no Bluetooth link, boom open) and 20 days of storage
time (boom closed).
Low Battery Warning Tones: When you hear five rapid high tones through the headset's
speaker at 20-second intervals, the headset needs recharging, and you will then need to
follow the above steps 1-4.
Linking the Headset to the Phone (Pairing)
Before you use your headset for the first time, you must first pair the headset with the
device you want to use it with – for example – a mobile phone. The Bluetooth connection
between the headset and your phone can be established by setting up a paired link. With
a paired link, the phone remembers the headset's ID, and these 2 items are then 'paired'
together - eliminating the need to repeat the set up process with future use. Only paired
devices can utilize Auto-Answer™ and Auto-Transfer™ functions.
Please use the following easy to follow guide –
8
a) Configuration Mode
Before you can pair your headset you need to put it into configuration mode.
Configuration mode is used to perform two functions – 'pairing' and Audio mode
selection. Configuration mode is entered simply by pressing and holding down the
Multi-Function Button (MFB) with the headset boom closed until the Blue indicator
light turns on, then release the MFB. The LED will remain on. The headset is now in
configuration mode and stays in this mode for 3 seconds awaiting further user
action. The headset will then return to the "off" state if no further action is taken.
b) Pairing Headset to the Phone
1. With the headset boom closed and the headset close to the phone (within 30
feet), enter configuration mode as described above. During pairing it is
recommended that the headset and phone (or device) are not more than 1metre
(3 feet) apart – with no solid objects in between.
2. Within the 3 seconds, open the boom.The LED will remain on and the headset is
now in pairing mode and will remain in pairing mode for 5 minutes.
Perform a "device discovery" from the mobile phone. For details on device
discovery consult your phone user guide. Please Note: it may take several seconds
to establish connections.
9