Bluetooth® Receiver Module - dB Technologies Ready 4 Bedienungsanleitung

ENGLISH
Bluetooth ® receiver module
BLUETOOTH ® input
The Bluetooth ®
devices in question must also be Bluetooth®-enabled.
This input is mainly used to listen to audio files.
The volume of this input is adjusted through the "MEDIA VOLUME" control (8).
Display
This menu allows to enable the "BLUETOOTH MODULE" input.
Press the OK button to enable and/or disable the function.
When the function is enabled the menu icon will be displayed in the status bar; now
you can connect to Ready 4 MK2 using a remote device.
Connection to a device
ATTENTION! If your device requires a password, conventionally use "0000".
Now you can play on READY 4 MK2 the tracks selected from the remote device.
39
The amplifier module of the READY 4 MK2 speaker houses the MBT-1 module,
for wireless connection with Bluetooth
cell phones, etc....).
input allows to easily connect the unit to remote devices by a wireless connection; the
•
Enable Bluetooth
then pressing OK to enable the "Power ON" function.
•
Make sure that the device to be associated is on and ready to
connect via Bluetooth
•
From the device search for the available Bluetooth
•
Select "READY 4 MK2" from the list.
•
From the device follow the instructions to associate READY 4 MK2
to it
® devices (Personal Computers, tablets,
® from the controls by selecting the menu and
® .
.
® devices.