Oregon Scientific WMR112 Bedienungsanleitung Seite 4

SECTION 3 OPERATION
THE MAIN UNIT
A WEATHER FORECAST AND BAROMETRIC
READING WINDOW
B INDOOR TEMPERATURE WINDOW
C INDOOR HUMIDITY WINDOW
D OUTDOOR/CHANNEL TEMPERATURE WINDOW
E OUTDOOR/CHANNEL
F RAINFALL WINDOW
G RF CALENDAR CLOCK AND DAILY ALARM
WINDOW
H WIND SPEED AND DIRECTION WINDOW
I CHANNEL BUTTON
J MEMORY BUTTON
K ALARM BUTTON
L SET BUTTON
M UNIT BUTTON
N ALARM ON/OFF BUTTON
O [ ] BUTTON
P [ ] BUTTON
HUMIDITY WINDOW
Q [ RESET] BUTTON
R DC 12V JACK
THE RF CALENDAR CLOCK
The calendar clock is radio-controlled. It automatically synchronizes
its current time and date when it is brought within range of the radio
signal generated from Frankfurt, Germany (DCF77). (MSF 60 for
UK version)
You can also set the calendar clock manually.
To do so,
1. Press the RF calendar clock and alarm window.
2. Press and hold [ ] to disable the radio reception function.
3. Press and hold [SET] till the digit flash.
4. Use [ ] and [ ] to change to the desired setting.
5. Press [SET] for the next item setting.
6. Repeat from Step 4 to finish all the settings for:
- Clock display formats (12hr or 24hr)
- Display language of the day-of-the-week
- Clock
- Calendar display formats (Month-Day, Day-Month)
- Calendar
For the display language, you can choose:
- English (E)
- German (D)
- French (F)
- Italian (I)
- Spanish (S)
7. Press [SET] to confirm.
The calendar clock and alarm window has three displays: clock with
seconds, clock with day-of-the-week and calendar. To change from
one display to another, press the window once.
THE DAILY ALARM
To set the daily alarm,
1. Press the RF calendar clock and alarm window.
2. Press [ALARM] and the (
that you are in the alarm mode.
3. Press and hold [SET] till the hour digit flash.
4. Use [ ] and [ ] to change to the desired setting.
5. Press [SET] for minutes setting.
6. Use [ ] and [ ] to change to the desired setting.
7. Press [SET] to confirm.
Note: the window will show "
Once set, the alarm clock will be activated automatically and the
alarm indicator will light up. When an alarm goes off indicator
will flash and a beep sound will be activated for 1 minute. Press any
button to stop it. The alarm is still active and will go off again the
next day.
4
• ) indicator will be display to indicate
( )
" if no alarm is armed.