Synchronization Using The Synckit Sk-100 - Tom Audio TG-101 eTour Bedienungsanleitung

5. Use the increase and decrease buttons (
Remark: You can find suggestions about the right choice of radio chan
6. Confirm your choice by pushing the confirmation button (
nitavely the device will save and lock the radio channel automatically
after five seconds.
7. The radio channel symbol (
( ) will reappear on the display.
8. The receivers now automatically change their channel to the transmit-
ter's channel.
9. The transmitter and receivers now form a group.

4.8. Synchronization using the SyncKit SK-100

The SyncKit SK-100 is available as an optional accessory which helps you to
synchronize large number of devices. It only works the second generation of
the charging and transportation bag, which was shipped from August 2014.
1. Please put the devices you want to synchronize in the charging cradle.
2. Connect the transportation and charging bag with a power outlet.
3. Turn on the SyncKit SK-100 by pushing the On button (
prox. three seconds.
4. Use the increase and decrease button to choose your desired radio
channel.
5. Now put the SyncKit in one of the charging cradles.
6. The charging cradle's LEDs will flash five times. All devices are now
synchronized
36/46
nels in chapter eight in this user manual.
BEDIENUNGSANLEITUNG
/ ) to adjust the channel.
)will stop flashing and the key symbol
). Alter-
) for ap-
www.tom-audio.com