Safety; Intended Use; Safety Information; Ce Designation - AEG Haustechnik NKE 102 Bedienung Und Installation

2. Safety

2.1

Intended use

The appliance is an electric direct heater for installation on a wall.
The appliance can be used as a full heating system particularly in bathrooms, or between seasons and as a booster heater in
smaller rooms, such as utility and guest rooms.
Any other use beyond that described shall be deemed inappropriate. Observation of these instructions is also part of the
correct use of this appliance. Any changes or modifications to this appliance void all warranty rights.

2.2 Safety information

Observe the following safety information and regulations.
Please read
Operate the appliance only when fully installed and with all safety equipment fitted.
Please note
Where children or persons with limited physical, sensory or mental capabilities are to be allowed
to control this equipment, ensure that this will only happen under supervision or after appropriate
instructions by a person responsible for their safety. Children should be supervised to ensure that they
never play with the equipment.
Risk of burns!
During operation, the air outlet grille reaches a temperature of over 85 °C.
Please read
Never cover the appliance. Risk of overheating.
Fire hazard
Keep easily flammable materials, such as spray cans, wax, petrol, solvents, nail varnish or similar away
from the appliance.
Fire hazard
If work that creates flammable vapours is carried out in the room, such as laying or sealing parquet
or PVC flooring, or if spray floor wax is used to treat the floor, take the appliance out of use by
disconnecting the power supply.

2.3 CE designation

The CE designation shows that the appliance meets all essential requirements according to the:
° Electromagnetic Compatibility Directive (Council Directive 89/336/EEC)
° Low Voltage Directive (Council Directive 73/23/EEC)
Operation - for users and contractors
15