Klarstein Vinsider 24D Bedienungsanleitung Seite 31

Control Panel and Functions Models 10029819, 10032965
POWER: To control this appliance turn on/off. To turn OFF the appliance, press the button and
hold 5 seconds.
LIGHT: To control the inner light turn on/off.
UP: Used to increase (warm) the set temperature by 1 C/1"F.
DOWN: Used to lower (cool) the set temperature by 1 C/1"F.
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
°C/°F from Fahrenheit to Celsius or from Celsius to Fahrenheit, press the UP and DOWN buttons at the
same time for 5 seconds.
You can set the temperature as required by pressing the UP or DOWN button. When you press the two but-
tons for the first time, the LED readout will show the original temperature set previously (the temperature
preset at the factory is 12 C/54 "F).
The temperature will increase 1 C/1"F if you press the UP button once or the temperature will decrease
1 C/1"F, if you press the DOWN button once.
To view the set temperature at any time, press the UP or DOWN button, the set temperature will tempo-
rarily flash in the LED display for 5 seconds.
The internal storage temperature will appear in blue color in the temperature display window.
Control Panel and Functions Models 10029820, 10032966
POWER: To control this appliance turn on/off. To turn OFF the appliance, press the button and
hold 5 seconds.
SET: To set or view the internal temperature setting for each zone.
LIGHT: To control the inner light turn on/off.
UP: Used to increase (warm) the set temperature by 1 C/1"F.
DOWN: Used to lower (cool) the set temperature by 1 C/1"F.
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
°C/°F
from Fahrenheit to Celsius or from Celsius to Fahrenheit, press the LIGHT button for 5 seconds
18