Nilox DoC Bedienungsanleitung Seite 12

DOC SKATE MAINTENANCE AND MANAGEMENT
CLEANING
•
Always close the power port before cleaning.
•
Always disconnect DOC SKATE from the charger before cleaning it.
•
Do not use thinners or other solvents to clean since they could damage surfaces.
•
Use a damp cloth to clean plastic parts.
•
Do not wash DOC SKATE with running water.
•
To remove mud or dirt from underneath the vehicle use a plastic brush.
BATTERY
•
Turn off DOC SKATE before charging it. Connect it to a power socket using the
supplied cord and charger.
•
The charger LED indicates the battery/charge level.
•
When the battery is fully charged, the LED turns green, so disconnect DOC SKATE
from the charger.
•
Charging for too long (>4 hours) could damage the battery, reducing its
duration.
•
To extend the battery's life, store DOC SKATE when it is fully charged.
•
Store in a dark place at a temperature between 5-25°C.
•
If not used for a long period of time, charge the battery once a month.
•
Battery life depends on various factors such as weather, storage and use.
•
Do not use the battery in the following cases:
abnormal smells and/or excessive heat.
Liquid leaks.
•
Do not touch any substance leaking from the battery.
•
Do not allow children or animals to touch the battery.
•
DOC SKATE cannot be used when charging.
•
Batteries contain hazardous substances. Do not open the battery and do not
insert anything inside it.
•
Only use the supplied battery charger.
•
If over-charged, lithium batteries may explode.
•
Do not throw in fires.
TRANSPORT
If you intend to transport DOC SKATE, including the battery, by plane or other
transportation means managed by third parties, contact the local authorities and carrier in
advance for information on transport restrictions or limits.
Lithium batteries are considered hazardous substances in many countries.
Before travelling, make sure access and transport are permitted.
International law prohibits shipping single lithium batteries by air.
If you ship your DOC SKATE, the battery must be inside.
EN
10