Troubleshooting Guide - Problems And Solutions - Amplicomms V130 Bedienungsanleitung

Troubleshooting guide - Problems and solutions

Equipment does not function
• Transmitter and/or receiver are not switched on.
• The batteries are empty or defective.
• The power adapter plugs are not connected.
No reception
• Transmitter and receiver are not registered.
• Transmitter is too far from object being monitored, e.g. baby.
Observe the minimum distance of one meter.
• The receiver and transmitter are too far apart.
• The VOX sensitivity is set too low.
Reception interference
• The receiver and transmitter are too far apart.
• The battery power is too low.
• Other electronic devices are causing interference in the field of trans-
mission.
Common wireless networks faults (WLAN)
• The transmission between the transmitter and receiver is on a per-
manently set channel in the 2.4 GHz frequency range. Wireless radio
networks (WLAN) also work in this frequency range. In the event of
interference, reception interruptions, etc., set your WLAN router to a
different channel.
Howling or squealing noise (acoustic feedback)
• Increase the distance between receiver and transmitter.
• Reduce the volume on the receiver.
Helpline UK 0844 800 6503
(See page 44 for costs and hours of operation)
A
PPENDIX
45