External Shaker Option - Amplicomms V130 Bedienungsanleitung

O
PERATING THE

External shaker option

1. The external shaker (Amplicomms PTV100) is an optional device
which is supplied separately to this system. The external shaker can
be plugged into the designated output at the side of the display on
the parent unit, to enable use as a powerful under-pillow vibrating
alert. The external shaker operates when the parent unit built-in
vibrator does. Therefore the vibrator option must be enabled within
the menu.
2. The parent unit display and sound, is activated when the system
detects the baby crying, the sensitivity level of which can be adjus-
ted in the VOX setting. A single activation of the external
vibrator/shaker also occurs. The parent unit stays active for 60
seconds following the trigger, during which time any further trigge-
ring of the vibrator/shaker will only occur when either of the two
sound level LEDs are activated by the incoming sound. Therefore the
incoming sound level has to be reasonably loud (at least
75dB@0.5mtrs) in order to trigger the 2nd highest LED. This is set to
avoid false triggering the system by one-off low level sounds such
as baby sighing for example.
40
R
ECEIVER
Helpline UK 0844 800 6503
(See page 44 for costs and hours of operation)