Switching The Receiver On/Off; Setting The Volume; Setting The Brightness; Temperature Option (Setting The Display Unit) - Amplicomms V130 Bedienungsanleitung

O
PERATING THE
Operating the Receiver
Check the transmitter and receiver are working properly each time befo-
re the equipment is put into operation.

Switching the receiver on/off

Press and hold this button until the logo appears first then the image
being taken by the transmitter camera.
Press and hold the button for approx. 1 second to switch the unit off.
In the case of a low battery charge, the Power LED flashes slowly. Place
the receiver in the charger to recharge the battery pack.

Setting the volume

Use these buttons to adjust the volume to one of five settings or
"Off".

Setting the brightness

Press the button once.
This icon appears in the display.
Use these buttons to adjust the brightness to one of five settings.

Temperature option (setting the display unit)

In the lower right hand corner the temperature in the baby's room is shown.
IMPORTANT INFORMATION The ideal temperature for a baby to sleep
is 16° - 18 °C. Please set or adjust the room temperature accordingly.
Press the button twice.
This icon appears in the display.
34
R
ECEIVER
Helpline UK 0844 800 6503
(See page 44 for costs and hours of operation)