Fault Handling; Maintenance And Storage; Suggestions - I-SUP HT-781 Bedienungsanleitung

i-SUP INTELLIGENT ELEKTRIC AIRPUMP
VII. Fault Handling
Fault
The air
pump
cannot be
started
normally.
Slow or
abnormal
inflation.
VIII. Maintenance and Storage
After using, or if you want to move, maintain or adjust the product,
*
please first pull out the DC plug from the socket.
when it is idle, it shall be properly stored after being fully cooled.
*
It shall not be exposed to the rain or immersed in water.
*
Please store it in the dry and ventilated place.
*
IX. Suggestions
The warranty period of this product is 6 months , and it is suggested to
use the original accessories. For any fault not caused by using the
original accessories, it shall be out of the warranty scope.
Inspection
1. The power source
is not plugged
properly.
2. The fuse in DC
plug (7) is burnt out.
3. Overheating or
overload causes
motor stop.
1. Check whether
the hose is blocked
or cracked.
2. The joint between
the hose and air
pump or air bag is
not installed
properly.
Solution
1. Make sure that the power wire is
plugged in the 12V DC socket.
2. Change the fuse.
3. Cool the motor and restart it.
4. If the problem cannot be solved,
please contact with the
manufacturer or its service agent or
the similar authorized personnel.
1. Change the hose or make it
unblocked, and check whether the
hose is cracked.
2. Reinstall the hose.
3. If the problem cannot be solved,
please contact with the
manufacturer or its service agent or
the similar authorized personnel.
15