Jeti DUPLEX Serie-2.4EX Bedienungsanleitung Seite 23

8. Mix ailerons-flaps: both flaps and ailerons are on the wings. CH1 controls ailerons (Y1 and Y5), CH6 controls flaps
(Y6 and Y7). Mixes ailerons so that they work also like flaps.
Transmitter Channel Set
channel
SetInputChannel CHx Set Center Mix CHx and CHy Mix Relation Mix Sign
Ailerons
Flaps
Out Pin Set
Function
Set Output
Pin
Aileron 1 Y1
Aileron 2 Y5
Flap 1 Y6
Flap 2 Y7
9) The receiver outputs will be programmed in such a manner that outputs Y1, Y2 and Y3 will be affiliated with the
same transmitter function. Servos connected to these inputs will be steering the same control device (for instance the
elevator) and will be coupled mechanically. On the transmitter is this function affiliated with the first channel CH1.
Out Pin Set
Set Set Reverse
Output In A
Pin Channel
Y1 Ch1 off
Y2 Ch1 off
Y3 Ch1 off
All outputs are affiliated with the input channel CH1 of the transmitter. Setups of reverse, gain, FailSafe, delay, curves
and ATV Limits check with all channels. The output channels are as well set up for the same group of servo pulse
generation. The servos will be temporally synchronized and accordingly movements of all servos will be synchronized.
Before mechanical coupling of individual servos (it is advantageous to use servos of the same type) we recommend to
bring them all with the aid of function „Output Trim" to the same neutral position in order to prevent reciprocal loads
of the servos. The setup of equal endpoint throws can be achieved by gain changes of the individual channels with the
aid of „Gain A/B".
CH1
CH6
Set In Reverse Reverse
Channel A B
Mix CH1 off off
Mix CH6 off off
CH6 off off
CH6 on on
Reverse Gain Gain
B A B
off 100% 100% Fail safe 1,5ms
off 100% 100% Fail safe 1,5ms
off 100% 100% Fail safe 1,5ms
Receivers
1,5ms CH1 and CH6
1,5ms CH6 and CH1
Gain A Gain B Fail
Safe
100% 100% 1,5ms
100% 100% 1,5ms
100% 100% 1,5ms
100% 100% 1,5ms
Signal Fail Delay Curve ATV
Fault Safe
0s
0s
0s
100%
100%
Delay Curve ATV
HighLimit
0s linear 2,0ms
0s linear 2,0ms
0s linear 2,0ms
0s linear 2,0ms
ATV
High Low
Limit Limit
linear 2,0ms 1,0ms 0,0ms
linear 2,0ms 1,0ms 0,0ms
linear 2,0ms 1,0ms 0,0ms
EN
+
-
ATV
LowLimit
1,0ms
1,0ms
1,0ms
1,0ms
Output Output
trim group
A
A
A