Mounting The Motor Plug On The Opposite Side - SCHUNK LDN-EL Serie Montage- Und Betriebsanleitung

Maintenance and repair work

7.4 Mounting the motor plug on the opposite side

Removing the motor
plug
124
05.00 | LDN | Montage- und Betriebsanleitung | en | GAS360925
Modifying the motor plug from side 1 to side 2
WARNING
For reasons of electrical safety, the motor plug may only be
replaced by a trained electrician.
Modifying the motor plug
Remove the motor housing
Ø
Unscrew the 2 screws (1).
Ø
Remove the cable cover (2).
Ø
Unscrew the 4 screws (3).
Ø
Remove the cover (4).
Ø
Unscrew the 4 screws (5).
Ø
Carefully pull out the motor plug (6) by about 2 mm.
Ø
Uninstalling the motor housing [ 122].
}