HumanTechnik cm-1 Bedienungsanleitung Seite 32

Ensure that the batteries are placed the right way around into the battery
compartment. The stipulated installation direction is indicated on the
bottom of the battery compartment.
N.B. This battery is not adequately charged upon delivery and has to be
!
charged fully on the CM charger first of all.
1. Switch off the CM1 transmitter.
2. Remove the battery compartment cover
3. Place the supplied batteries into the battery compartment (note the polarity!).
4. Place the cover onto the battery compartment.
5. Place the CM-1 transmitter onto one of the CM chargers.
The green LED on the CM charger flashes throughout the charging process.
The battery is fully charged after 12 hours.
CM charger
2
3 4
32 English
1 5