System Setup; Cranking Test - AEG 97133 Bedienungsanleitung

System Setup

System Setup
Fig. 3:
Nr. Funktion
Daily notification settings
Green = on
Grey = off
14
The default is to send a maximum of one mes-
sage every 6 hours, however the frequency can
be changed.
Changing test notifications:
Green = on
Grey = off
15
The default is to send a maximum of one mes-
sage every 6 hours, however the frequency can
be changed.
Bluetooth settings
Tap here to open the Bluetooth device settings.
16 here you can scan for nearby devices and view
previous connections. Changing the Bluetooth
device name.
Installation Tutorial
17
will replay the app demo.
Firmware update interface:
18 use to view the hardware version and update the
firmware if a new version is available.
19 Current app version number

Cranking Test

1. Tap the "Cranking Test" (9) icon to test the
cranking system.
2. Start the engine of your vehicle.
14
15
16
17
18
19
Cranking Test
Fig. 4:
No. Function
20 help - Test description
Displays the cranking current value
21 Green = voltage good
Red = voltage poor
22 Voltage graph
When the engine starts, the Battery Monitor will
automatically test the cranking system and save
the results. A starting cranking voltage of 9.6 V and
higher is typically normal. If the cranking voltage is
less than 9.6 V, it is too low. If the cranking voltage
is too low this may be due to battery ageing, low
power, or a starter fault.
English 23
20
21
22