Interface / Battery Voltage Test; Voltage Graph - AEG 97133 Bedienungsanleitung

22 www.aeg-automotive.com

Interface / Battery Voltage Test

11
10
9
8
Welcome Screen / Voltage Test
Fig. 1:
No. Function
This shows the ID number (default) / the device
name.
1
you can assign a device name in the Device
Manager under System Settings (2).
2 System Settings icon, tap to open settings.
Battery charge in % whilst not charging.
3
The ring will rotate during charging.
Shows the actual battery voltage
> 12.7 V = battery fully charged
4
12.4 V to 12.7 V = battery ok
< 12.4 V = low voltage.
Shows the battery voltage graph.
5
Tap the curve chart to view each individual day.
"Charging Test" icon for testing the charging
6
system, for manually testing the charging system.
"Trip" icon for the trip record, saves each start
7
time, stop time, and trip times for the vehicle.
No. Function
1
"Cranking Test" icon for testing the battery volt-
8
2 age, preset to primary interface.
Symbol for testing the cranking system, the
9 cranking system will automatically be tested
3
every time the engine is started.
Battery status
Blue = battery ok, charging status
10
orange = charge soon
4
Red = low voltage
Blue = connected
Red = disconnected
11 After loading the settings it will automatically
restore the last connection, or you can connect or
disconnect manuall.
Symbols (6, 7, 8, 9)
Blue = selected
5
Grey = not selected

Voltage Graph

6
7
Voltage graph
Fig. 2:
No. Function
Date selection: Clicking on this will open a
calendar,
12 orange = voltage graph available for this day
red number: A voltage abnormality occurred on
this day
Voltage graph; tapping it will show a slider, with
the test time appearing above the slider, the or-
13
ange number below the graph shows the voltage
value during this period.
12 12
13 13