Herunterladen Inhalt Inhalt Diese Seite drucken

Inhaltsverzeichnis; Old Appliances; Before Use - Vestfrost SZ...C Serie Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
GB
Thank you for purchasing your new freezer
from Vestfrost. Please note that these
instructions apply to all chest freezers
in the SZ range. Illustrations and fittings
may therefore not necessarily correspond
exactly to your model.
Warning
As the refrigerant used in this appliance is a
flammable gas (Isobutane R600a), special
care must be taken to prevent damage
to the refrigerant circuit and piping during
transport and installation.
If damage does occur, avoid sparks or
naked flame in the vicinity of the appliance,
ensure that the room is well ventilated,
disconnect the power supply, and contact
your supplier.
The unit must only be serviced by qualified
technicians from an approved service
centre.
Old appliances
Old refrigerators and freezers are often
fitted with complicated latches that can
only be opened from the outside. If you
have one of these old units stored away
somewhere, or if you scrap one, remember
to destroy the latch first in order to prevent
children from being exposed to great
danger by getting locked inside the unit.
Before use
Before operating your new appliance,
please read the following instructions
carefully as they contain important
information on safety, installation, operation
and maintenance. Keep the instructions for
future reference.
On receipt check to ensure that the
appliance has not been damaged.
Transport damage should be reported to the
local distributor before the appliance is put
to use.
Remove the packaging. Clean the inside of
the cabinet using warm water with a mild,
perfume-free detergent. Rinse with clean
water and dry thoroughly (see cleaning
instructions). Use a soft cloth.
If the appliance has been stored in cold
surroundings (colder than +5 °C), it must
be allowed to stabilise for at least an hour
before being switched on.
If the appliance has been stood on end
during transport, it must be allowed to
stabilise in normal position for approx. 12
hours before being switched on.
Contents
Installation and start-up....................4
Electrical connection.........................5
Operation and function.....................6
Use...................................................8
Defrosting.........................................9
Fault finding.....................................11
spare parts and service...................12
Disposal..........................................13


Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis