Technical Data - Red Bull Racing SMR 58 Gebrauchsanweisung

Cleaning the stainless steel razor blade [1]
After use, blow on the comb attachments [7, 8, 9] and the stainless steel razor blade [1]
to remove any hair from them. You can also carefully remove wet hair with your fingers.
WARNING
When cleaning using your fingers, ensure that you do not injure yourself on the sharp
edges of the stainless steel razor blade [1].
To clean the stainless steel razor blade [1] particularly thoroughly, you can also rinse
it under running water. Proceed as follows:
1. Carefully grasp the stainless steel razor blade [1] from
below in the red area using your thumb and index finger.
Pull the stainless steel razor blade [1] up and off.
When removing the stainless steel razor blade [1],
ensure you do not injure yourself on the sharp edges.
2. Hold the stainless steel razor blade [1] under running
water so that the jet of water runs through the stainless
steel razor blade [1] from the inside out.
3. Leave the stainless steel razor blade [1] to dry completely
before reattaching it to the device.

9. Technical data

Model
Weight
Device dimensions
Device protection class
Adapter protection class
Voltage supply
(TPA-97050100V11)
Battery:
Capacity
Nominal voltage
Type designation
Subject to technical changes
SMR 58
103 g
17.1 x 3.8 x 3.3 cm
IPX6
IPX4
Input: 100-240 V~; 50/60 Hz; 0.15 A
Output: 5 V
600 mAh
3.2 V
Lithium-ion
47
1 A