Cutting/Trimming Hair; Cleaning And Maintenance - Red Bull Racing SMR 58 Gebrauchsanweisung

Cutting/trimming hair

You can either trim body hair with one of the comb
attachments [7, 8, 9] or remove it entirely without a
comb attachment [7, 8, 9].
• If you want to use one of the comb attachments [7,
8, 9] attach it to the device as shown. Make sure
that you hear and feel the comb attachment [7, 8,
9] click into place. We recommend that when you
select the comb attachment [7, 8, 9], you initially
start with the longest cutting length so that you can
then slowly work your way to your desired length.
• Press the ON/OFF button
starts to illuminate.
• Guide the device slowly through the body hair. Ensure that the stainless steel razor
blade [1] sits as flat against the body as possible.
• Always only trim small areas.
• Cut the hair against the direction of growth. If the hair grows in different directions,
use the device in multiple directions.
• Press the ON/OFF button
operating display [2] goes out.

8. Cleaning and maintenance

Cleaning the device
WARNING
• Always pull the mains adapter [10] out of the socket before cleaning the device.
Risk of electric shock!
• Remove the comb attachment [7, 8, 9] before cleaning.
• Only clean the housing of the device with a soft cloth dampened with warm water.
• Do not clean the device with highly flammable liquids. Risk of fire!
• Do not clean the device in the dishwasher.
• Clean the stainless steel razor blade [1] and the comb attachments [7, 8, 9] after
each use to prevent lots of hair getting jammed inside, which could otherwise
impede flawless operation.
• Leave the comb attachments [7, 8, 9] to dry completely before reattaching them
to the device.
• If you do not use the device for a long period of time, place the protective cap [6] onto
the stainless steel razor blade [1] and store the device and the comb attachments
[7, 8, 9] in the storage bag [11] supplied.
[3] to switch on the device. The operating display [2]
[3] again to switch off the device after use. The
46