Haier HB21T Gebrauchsanleitung Seite 59

About Freezer Compartment
Knob on icemaker
Ice storage bin
Bulb specifications: 230V~, 25W
Socket: E14 (DO NOT use a bulb over 25W)
To replace the light bulb:
Unplug the appliance.
Remove the front screw with a screwdriver.
To remove the light shield, press the stopper at front
out of the square hole.
Pull the shield forward until the retainer is separated
from the square hole.
Turn the bulb anticlockwise and out. Replace a bulb of
the same specifications in the reverse sequence of
removal.
To replace the light shield: Engaged the retainer into the
square hole and then press the shield front backward
until the stopper is locked in the square hole. Replace
and tighten the screw.
2 3
Screw hole
Square
hole
Stopper
Retainer
Freezer light bulb