Teaching-In Max! Components; Power Supply - eQ-3 MAX! Cube Bedienungsanleitung

6. Teaching-in MAX! Components

In order to enable communication between MAX! Compo-
nents, the devices have to be taught-in to one another.
Devices are taught-in on the MAX! Cube with the user-
friendly MAX! PC software.
The MAX! Cube draws its power supply from the plug-in
main adapter included in the scope of supply.
• Plug the USB main adapter supplied into a socket
outlet.
Connect the MAX! Cube and the main adapter with the
•
USB cable. Use the USB port on the side of the device
(2) for this purpose.
Alternatively, power can be supplied to the MAX!
Cube via the USB port on a computer or a router.
Please note that in the case of some models, the
USB voltage is no longer available once the device
has been switched off.
If the power supply to the MAX! Cube is interrupted,
the thermostats in the rooms continue to regulate
the temperature independently. The MAX! Cube
serves solely as the interface to the MAX! Software,
to a MAX! Eco Switch and as a central data store.
16
Once the wall bracket is in place, the
•
MAX! Cube can be attached to the wall
bracket from above, with the opening
pointing down.

7. Power supply