Changing The Input Source - Samsung UE32C6000 Benutzerhandbuch

Connections
CONNECTIONS COMMON INTERFACE Slot
To watch paid channels, the "CI or CI+ CARD" must be inserted.
If you don't insert the "CI or CI+ CARD," some channels will display
the message "Scrambled Signal".
The pairing information containing a telephone number, the "CI or CI+
CARD" ID the Host ID and other information will be displayed in about
2~3 minutes. If an error message is displayed, please contact your
service provider.
When the configuration of channel information has finished, the
message "Updating Completed" is displayed, indicating the channel
list is updated.
✎
NOTE
x
You must obtain a "CI or CI+ CARD" from a local cable service provider.
x
When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI or CI+ CARD" may
cause damage to it.
x
Insert the "CI or CI+ CARD" in the direction marked on the card.
x
The location of the
x
"CI or CI+ CARD" is not supported in some countries and regions; check with your authorized dealer.
x
If you have any problems, please contact a service provider.
x
Insert the "CI or CI+ CARD" that supports the current antenna settings. The screen will be distorted or will not be seen.

Changing the Input Source

Source List
Use to select TV or an external input
sources such as a DVD / Blu-ray player /
cable box / STB satellite receiver.
■ TV / Ext. / PC / AV / Component
/ HDMI1/DVI / HDMI2 / HDMI3 /
HDMI4 / USB
✎
In the Source List, connected
inputs will be highlighted.
✎
Ext. and PC always stay activated.
10
English
COMMON INTERFACE
SOURCE
slot may be different depending on the model.
Edit Name
■ VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC /
DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:
Name the device connected to the input jacks to make
your input source selection easier.
✎
When a PC with a resolution of 1920 x 1080 @
60Hz is connected to the
you should set to DVI PC mode under Edit Name.
✎
When connecting an HDMI/DVI cable to the
HDMI IN 1(DVI)
DVI Devices mode under Edit Name.
HDMI IN 1(DVI)
port, you should set to DVI PC or
port,