Replacing The Filter - JENCONS POWERPETTE Gebrauchsanweisung

Cleaning
Before cleaning disconnect from the mains charger. Do not clean the mains charger.
POWERPETTE / POWERPETTE
The
with most common laboratory disinfectants. The polypropylene nosecone (10) and silicone
pipette holder (9) can be autoclaved.
To remove the nosecone and pipette holder turn the nosecone anti-clockwise. When the nosecone
is removed the silicone pipette holder can also be disengaged from the filter by gently turning.
The hydrophobic filter (8) will require occasional replacement when wetted by the liquid and
whenever suction capacity is slowing.

Replacing the Filter

The hydrophobic filter (8) will require
occasional replacement, particularly
when suction capacity is slowing.
Note
Only use genuine manufacturer's
recommended filters and accessories.
/ POWERPETTE
Plus
These parts are common to
both the
POWERPETTE
POWERPETTE
5
OPERATOR
Instructions
can be cleaned
POWERPETTE,
and
Plus