Install The Linkage Rod - Staufenbiel EDGE 540 Anleitung

EN
30

INSTALL THE LINKAGE ROD

1. The four pieces are for ailerons rudder and eleva-
tor
2. Insert the linkage
rod into the second
hole of the surface
control horn and snap
the clevis to fix it.
3. Insert the linkage rod into the control horn. The
provided piece of fuel tubing keeps the clevis closed
during flight. Secure all the linkages the same way.
Note: Do not over slide the securing tube or it will
impede the movement of the surface control horn.
Install all of the linkages the same way.
4. Install the elevator
under the instruction of
2 and 3.
5. Install the rudder
under the instruction of
2 and 3.