User Interface - AVM FRITZ!Powerline 1240E Bedienungsanleitung

Extending a Wireless LAN Network
Here is how to use FRITZ!Powerline 1240E as a WLAN repeater.
1. Start a web browser and enter http://fritz.powerline
FRITZ!Powerline 1240E user interface opens.
2. Open the Access to the Home Network and click Change Connection Type.
3. Select Wireless Bridge and click Next. A wizard starts to guide you through the
confi guration process.
4. Click Finish.
5. If FRITZ!Powerline 1240E is connected with your Internet router via a powerline or
LAN connection, clear this connection.
6. FRITZ!Powerline 1240E and your Internet router can be connected with only one
kind of connection.
7. Connect your wireless LAN and network devices with FRITZ!Powerline 1240E.
WLAN
10
in the address line. The
WLAN

User Interface

Open the user interface in your web browser by entering
 fritz.powerline, if FRITZ!Powerline 1240E is connected with a FRITZ!Box.
 192.168.178.2, if FRITZ!Powerline 1240E is not connected with a router yet.
 the
<IP address>. The IP address is assigned by your Internet router as soon as one
or more FRITZ!Powerline 1240E adapters are located in your home network.
In the user interface you can, for instance, confi gure settings for the socket, switch the
button LEDs on and off , change the access to the home network, or perform a FRITZ!OS
update.
Expanding an Ethernet Home Network
Here is how to use FRITZ!Powerline 1240E as a LAN bridge in your Ethernet home network.
1. Start a web browser and enter fritz.powerline
line 1240E user interface opens.
2. Open the Access to the Home Network and click Change Connection Type.
3. Select LAN Bridge and click Next. A wizard starts to guide you through the confi gu-
ration process.
4. Click Finish.
5. Connect your wireless LAN and network devices with FRITZ!Powerline 1240E.
in the address line. The FRITZ!Power-
11