AVM FRITZ!Powerline 540E Bedienungsanleitung Seite 7

LEDs and Button: FRITZ!Powerline 540E
Condition Meaning
on • Wireless LAN enabled
off • Wireless LAN disabled (in the user interface)
fl ashing • in Wireless Bridge mode: Searching for the access point
on • Connected with the powerline network
• No connection with the powerline network, or powerline
off
switched off (in the user interface)
• FRITZ!Powerline is being integrated into the FRITZ!Box's
Mesh WiFi
• Receiving or transmitting the password of the powerline
Flashing
network
together
• Performing WPS (Wi-Fi Protected Setup)
• Restart
Integrate FRITZ!Powerline into the powerline
network
Initiate WPS / Enable Mesh WiFi
Load factory settings
12
WLAN•WPS Powerline•Security
Press for 1 sec.
Press for 1
sec.
Press both for at least 15 sec.
LEDs and Button: FRITZ!Powerline 510E
Condition Meaning
on • Has electric power
Power
fl ashing • Restarting
fl ashing slowly • On standby
off • No electric power
on • LAN port in use
LAN
• No LAN cable connected or the device on the LAN
off
cable is switched off
• Connected with the powerline network and ready for
Powerline
on
data exchange
fl ashing • Confi guring security settings
• No compatible powerline devices detected, or no
off
devices that use the same network key detected
Press Security
Integrate FRITZ!Powerline into the
for 1 second
powerline network
Load factory settings for 10 to 15 seconds
13