AVM FRITZ!Powerline 540E Bedienungsanleitung Seite 5

Starting Operation of the FRITZ!Powerline 540E WLAN Set
1. Insert the FRITZ!Powerline 510E in an outlet and use the LAN
cable to connect it with your Internet router (FRITZ!Box).
2. Insert FRITZ!Powerline 540E in an outlet close to your Internet
router (FRITZ!Box) and wait until the „Powerline" LED lights up
permanently.
If you have a FRITZ!Box with FRITZ!OS 6.90 or higher installed, you
can integrate FRITZ!Powerline 540E into the Mesh WiFi of your
FRITZ!Box: First trigger registration mode with the "WPS" or "Con-
nect" button on the FRITZ!Box, and then press the „WLAN•WPS"
button on FRITZ!Powerline 540E and hold it down for 1 second.
The LEDs on FRITZ!Powerline 540E will start fl ashing.
3. As soon as the „WLAN•WPS" LED stops fl ashing, you can insert
FRITZ!Powerline 540E into an outlet at the location where you
need access to the Internet and the home network for your smart-
phone, tablet and other network devices.
8
1
LAN
2
LAN
3
Electrical wiring
Power
LAN
Powerlin e
FRITZ!Powerline 510E
Electrical wiring
Power
LAN
Powerline
FRITZ!Powerline 510E
FRITZ!Powerline 540E
FRITZ!Powerline 540E
9