Axis T91A61 Installationsanleitung Seite 12

Page 12
Install the AXIS T91A67 Pole Mount
Hardware overview,
1. Refer to
the supplied parts.
2. Route the necessary cables through the bracket, securing them with
the cable holder.
3. Use the supplied steel straps to attach the bracket to the pole and
tighten with a steel strap tool (not supplied).
Cable
holder
4. Refer to the Installation Guide for the network camera for instructions on how to attach the
camera to the bracket.
on page 4 and page 5 for information on
Cable
holder
Cable
AXIS T91A Series Installation Guide
Steel straps
Pole mount