Servicing And Cleaning - VITLAB micropipette -12 Gebrauchsanweisung

13. Servicing and Cleaning

The three main components of the manifold can be easily separated and disassembled for servicing,
cleaning or replacing parts. The procedures are illustrated on the following pages.
Note:
The changing of the V-rings on the individual nose cones is
described in detail in the instructions enclosed with the spare
part.
13.1 The main components of the manifold
A Piston unit with piston support bar [ I ] and pistons inserted in
this unit, which can be unscrewed individually for cleaning or
replacement.
B Nose cone assembly with nose cone support bar [ II ] and cen-
tral guide rod (Z), which is attached to this, and the nose cones
and seals, which can be unscrewed individually for cleaning or
replacement.
C Manifold housing, which is connected to the manifold
housing cover [ III ] of the piston unit with two turnlock fasten-
ers.
A
Z
B
C
III
I
II
33