Measuring Unit; Minimum / Maximum Recording; Saving Measured Values - TESTBOY TV 610 Bedienungsanleitung

Operation

Measuring unit

The basic setting of the measuring unit is metres (m). Press the (k)
When measuring distances, choose between metres (m), inches (in), feet (ft) and feet and
inches (" + ").
When measuring surfaces, choose between square metres (m²) and square feet (ft²).
When measuring volumes, choose between cubic metres (m³) and cubic feet (ft³).

Minimum / maximum recording

To show the shortest and widest distances during continual distance measurement, press
the (I) button. A short tone will sound following every new measurement result.
The shortest distance (min.) measured is displayed in the upper-most row.
The longest distance measured (max.) is displayed in the second row.
The current distance measured is displayed in the lowest row.
Pressing the "OFF" button will interrupt the continual distance measurement; the measured
values will continue to be shown on the display.
Ready to measure
The continual distance measurement is automatically aborted after 5 minutes.

Saving measured values

The instrument automatically saves the last 20 measured values.
Press the (E) button to display the measured value history. The display will show the last
measured value and the
using the (D) and (J)
The last measured value has the index 1, the previous measured value has the index 2, etc.
Please note: The historic data cannot be deleted.
Press the (F) button to leave the measured value history and to return to measuring mode.
24
►
Continual distance measurement
with minimum and maximum value.
symbol with the index 1. The index can be increased or reduced
buttons.
button to change this.
TV 610